Drive System - Minolta EPI 054 User Manual

FrameMaker Ver.5.5(PC) EP1054/EP1085/EP2030 GENERAL, MECHANICAL/ELECTRICAL
98.04.24
1174SBM0300A
3

DRIVE SYSTEM

This copier is equipped with two main drive motors, the PC Drive Motor that drives the
upper half of the copier (Imaging Unit) and the Main Drive Motor which gives drive for the
lower half of the copier (paper take-up/feeding, transport mechanism and Fusing Unit).
Each has its own drive transmitting gears and timing belts as illustrated below.
Drive Train for Lower Half of Copier
Coupled to Paper
Take-Up Unit
Drive Train for
Paper Take-Up Unit
<23 cpm Copier>
Coupled to Copier Gear
1st Vertical
Transport Roller
2nd Vertical
Transport Roller
Coupled to Exit/Duplex
Switching Unit
Paper Exit Roller Drive
Suction Unit
Drive
Synchronizing Roller Clutch CL 1
Paper Transport
Clutch CL 2
Drive Train for Upper
Half of Copier
<15/18 cpm Copier>
1st Drawer Paper
Take-Up Roll
Vertical
Transport Roller
2nd Drawer Paper
Take-Up Roll
1139M004AA
M-6
Upper Fusing
Roller Drive
Main Drive Motor M2
1151M001YB
PC Drum Drive
Imaging Unit
Drive
1139M005AA
PC Drive Motor M1
Coupled to Copier Gear
Paper Drawer Paper
Take-Up Roll
1142M002AA