Minolta EPI 054 User Manual page 51

FrameMaker Ver.5.5(PC) EP1054/EP1085/EP2030 DIS/REASSEMBLY, ADJUSTMENT
98.04.13
1139D154AA
Replacement of the Cleaning Blade
1139D164AA
1139D165AA
Applying Toner to Cleaning Blade
Apply toner to the entire surface of the Cleaning Blade.
(Do not forget to coat the surfaces on both ends.)
Install the PC Drum.
Apply a thin coat of toner to the PC Drum.
Turn the PC Drum 1/2 turns backward, then turn it one complete turn forward.
6. Tilt the Developing Unit to remove the developer.
7. Remove two screws and the Lid.
8. Remove the spring.
9. Remove two screws, one spring, one cap and the
Cleaning Blade. Replace it with a new one.
NOTE
When the Cleaning Blade has been replaced, apply
toner to the entire surface of the new Cleaning Blade.
D-32