FrameMaker Ver.5.5(PC) EP1054/EP1085/EP2030 GENERAL, MECHANICAL/ELECTRICAL
98.04.24
1
ON
Approx. 0.5
Scanner Motor
OFF
Approx. 0.2
Approx. 0.5
F A scan motion is completed.
SCEND signal: LOW
ON
Approx. 0.2
Approx. 0.3
Approx. 0.6
OFF
Approx. 0.3
Scanner Reference Position Sensor
Image Erase Lamp LEDs ON/OFF control is started.
ON
Synchronizing Roller Clutch
ON
Paper Transport Clutch
All LEDs of Image Erase Lamp ON
Scanner starts return motion.
ON
Scanner Reference Position Sensor
For A4 crosswise, ×1.000
Exposure Lamp
M-10