Drive System - Minolta EP1080 Service Manual

3

DRIVE SYSTEM

This copier is equipped with two main drive motors, PC Drive Motor M1 that
drives the upper half of the copier (Imaging Unit) and Main Drive Motor M2
which gives drive for the lower half of the copier (paper take-up/feeding and
transport mechanism and Fusing Unit). Each has its own drive transmitting
gears and timing belts as illustrated below.
(Drive Train for Lower Half of Copier)
Coupled to Paper
Take-Up Unit
(Drive Train for
Paper Take-Up Unit)
Coupled to Copier Gear
1st Vertical
Transport Roller
2nd Vertical
Transport Roller
Paper Exit Roller Drive
Synchronizing Roller Clutch CL1
Paper Transport
Clutch CL2
1st Drawer Paper
Take-Up Roll
2nd Drawer Paper
Take-Up Roll
M-4
Coupled to Exit/Duplex
Switching Unit
Upper Fusing
Roller Drive
Suction Unit
Drive
Main Drive Motor M2
(Drive Train for Upper
Half of Copier)
PC Drum Drive
Imaging Unit
Drive
PC Drive Motor M1