Setting Date And Time - Kyocera ECOSYS M6026cdn Type B Operation Manual

Setting Date and Time

Follow the steps below to set the local date and time at the place of installation.
When you send an E-mail using the transmission function, the date and time as set here will be printed in the
header of the E-mail message. Set the date, time and time difference from GMT of the region where the
machine is used.
NOTE:
Be sure to set the time difference before setting the date and time.
Login User Name: L b
********************
Login Password:
Sys. Menu/Count.: a b
5
User Property
6
*********************
Common Settings
7
Copy
Common Settings: a b
1
*********************
Language
2
Default Screen
3
Sound
1
Off
On
2
[ Login ]
3
[ Exit ]
4
[ Exit ]
5
2-12
Turn on the main power switch.
Press the System Menu/Counter key on the main
unit operation panel.
When you are performing user management and
have not logged in, a login screen will appear.
Then, enter the Login User Name and Login
Password to log in.
In the Sys. Menu/Count. menu, press the  or 
key to select [Common Settings].
Press the OK key. The Common Settings menu
appears.
Press the  or  key to select [Date Setting].
Preparation before Use