Adding A Group - Kyocera ECOSYS M6026cdn Type B Operation Manual

Adding a Group

Compile two or more individuals into a group. Designations in the group can be added at the same time. When
adding a group, a maximum of 50 groups can be added in the Address Book.
NOTE:
If user login administration is enabled, you can only edit destinations in the Address Book by logging
in with administrator privileges.
Before adding a group in the Address Book, the individuals to be included in the group must be added first.Up
to 100 destinations can be added as the addresses. Among them, 5 destinations can be assigned for a FTP or
SMB address. The available addresses will then be 95 in total for email and/or fax addresses.
Use the procedure below to register a group.
Sys. Menu/Count.:a b
;
Document Box
<
*********************
Edit Destination
=
Adjust/Maint.
Edit Destination:a b
1
*********************
Addressbook
2
Print List
Addressbook:
k Design
*********************
l Fiala
l Maury
Menu:
1
Detail/Edit
2
Delete
3
*********************
Add Address
1
[ Exit ]
2
[ Exit ]
3
4
a b
[ Menu ]
5
a b
6
8-164
Default Setting (System Menu)
In the Sys. Menu/Count. menu, press the  or 
key to select [Edit Destination].
Press the OK key. The Edit Destination menu
appears.
Press the  or  key to select [Address Book].
Press the OK key. The Address Book list screen
appears.
Press [Menu] (the Right Select key). Menu
appears.
Press the  or  key to select [Add Address].