Background Density - Kyocera ECOSYS M6026cdn Type B Operation Manual

Background Density

Removes dark background from originals, such as newspapers.
If the ground color is obtrusive, select [Auto]. If [Auto] does not remove the ground color, select [Manual] and
adjust the density of the ground color.
NOTE:
This feature is used with full color and auto color copying. Background Density Adjust is disabled
during auto color sending when the a black & white original has been detected.
The setting items are as follows.
Off
Auto
Manual
Follow the steps below to use background density adjust.
Function Menu:
1 Color Selection g
*********************
2
Original Size
3
Original Image
Original
Item
Does not adjust the ground color.
Automatically adjusts the background density
based on the original.
Manually adjust the density in 5 levels. When
[Manual] is selected, press [1 (Lighter)] to
[5 (Darker)] to adjust the background density.
a b
T
T
[ Exit ]
Scanning Image
Description
1
Press the Send key.
2
Place the originals on the platen or in the
document processor.
3
Press the Function Menu key. Function Menu
appears.
4
Press the  or  key to select [Backgrnd Density].
5-23
Sending Functions
5