Drum Refresh (Drum Refresh Mode Setting) - Kyocera ECOSYS M6026cdn Type B Operation Manual

Service Setting: a b
1
*********************
Service Status
2
Network Status
3
Test Page
Start the laser
scanner cleaning.
Are you sure?
[ Yes

Drum Refresh (Drum refresh mode setting)

This sets the refresh mode for the drum. When the printing quality declines, refreshing the drum can restore the
printing quality.
Use the procedure below to set the drum refresh mode setting.
Sys. Menu/Count.:a b
;
Document Box
<
Edit Destination
=
*********************
Adjust/Maint.
Adjust/Maint.:
1
*********************
Copy Denst. Adj.
2
Send/Box Density
3
Backgrnd Density
[ Exit ]
] [ No ]
[ Exit ]
a b
[ Exit ]
8-136
4
Press the OK key. The Service Setting menu
appears.
5
Press the  or  key to select [LaserScanner
Cln].
6
Press the OK key. A confirmation screen appears.
7
Press [Yes] (the Left Select key). Completed. is
displayed and the screen returns to the Service
Setting menu.
1
In the Sys. Menu/Count. menu, press the  or 
key to select [Adjust/Maint.].
2
Press the OK key. The Adjust/Maint. menu
appears.
3
Press the  or  key to select [Service Setting].
Default Setting (System Menu)