Auto % Priority: a b
1 *Off
*********************
2
On
DP Read Action
You can set whether priority is given to speed or image quality when scanning an original on the document
processor.
The table below shows the available settings. The default setting is Speed Priority.
Speed Priority
Quality Priority
Use the procedure below to specify the DP Read Action.
Sys. Menu/Count.:a b
7
*********************
Copy
8
Printer
9
Send
Copy:
1
*********************
Paper Selection
2
AutoPaperSelect.
3
Auto % Priority
DP Read Action:
1 *Speed Priority
*********************
2
Quality Priority
Item
Priority is given to speed when scanning
Priority is given to image quality when scanning
[ Exit
]
a b
[ Exit
]
a b
4
Press the OK key. AutoPaperSelect. appears.
5
Press the or key to select [Off] or [On].
6
Press the OK key. Completed. is displayed and the
screen returns to the Copy menu.
Detail
1
In the Sys. Menu/Count. menu, press the or
key to select [Copy].
2
Press the OK key. The Copy menu appears.
3
Press the or key to select [DP Read Action].
4
Press the OK key. DP Read Action appears.
8-72
Default Setting (System Menu)