Kyocera ECOSYS M6026cdn Type B Operation Manual page 439

Network Setting: a b
1 *TCP/IP Setting
*********************
2
WSD-SCAN
3
WSD-PRINT
[ Exit
TCP/IP Settings: a b
3
IPv6 Setting
4
Bonjour
5
*********************
Protocol Detail
[ Exit
Protocol Detail: a b
1
*********************
NetBEUI
2
SNMPv3
3
FTP(Server)
FTP(Client)
:
1 *Off
*********************
2
On
Port Number
:
(1 - 65535)
*******21*
4
Press the OK key. The Network Setting menu
appears.
]
5
Press the  or  key to select [TCP/IP Settings].
6
Press the OK key. The TCP/IP Settings menu
appears.
]
7
Press the  or  key to select [Protocol Detail].
8
Press the OK key. The Protocol Detail menu
appears.
9
Press the  or  key to select the item for which
you want to make settings.
10
Press the OK key. This displays the setting screen
a b
for the item selected in step 9.
The screen shown is the one when [FTP(Client)] is
selected.
11
Press the  or  key to select [On] or [Off].
If you select [On] for each of [FTP(Client)] and
D b
[IPP] and press the OK key, a port number entry
screen appears.
Press the  or  key or the numeric keys to set
the port number.
12
Press the OK key. Completed. is displayed and the
screen returns to the Protocol Detail menu.
8-183
Default Setting (System Menu)
8