Kyocera ECOSYS M6026cdn Type B Operation Manual page 250

Register:
1
*********************
Address Book
2 *Address Entry
Automatic Job Log History Transmission
This function automatically sends the job log history to the specified destinations whenever a set number of jobs
has been logged.
Use the procedure below to set automatic job log history transmission.
Job Log History: a b
1
*********************
Auto Sending
2
Send History
3
Destination
Auto Sending:
1 *Off
*********************
2
On
Jobs:
Manual Job Log History Transmission
You can also send the job log history to the specified destinations manually.
Use the procedure below to send the job log history manually.
a b
[ Exit
a b
D b
(1 - 16)
******16*jobs
NOTE:
If the address of the selected destination has
been changed after you selected the destination from
the address book, [*] is displayed before [Address
Entry]. Refer to Confirming Current Destination on
page 7-14 and reconfirm the destination address.
1
In the Job Log History menu, press the  or  key
to select [Auto Sending].
]
2
Press the OK key. Auto Sending appears.
3
Press the  or  key to select [Off] or [On].
If you select [On] and press the OK key, Jobs
appears. Use the numeric keys to enter the
number of jobs to be sent at a time.
4
Press the OK key. Completed. is displayed and the
screen returns to the Job Log History menu.
7-16
Status / Job Cancel