Use the procedure below to setup the TCP/IP (IPv4) setting.
Login User Name: L b
********************
Login Password:
Sys. Menu/Count.:a b
1
*********************
Report
2
Counter
3
System/Network
Administrator only.
System/Network:
1
*********************
Network Setting
2
Optional Network
3
NW InterfaceSend
Network Setting: a b
1
*********************
TCP/IP Settings
2
WSD-SCAN
3
WSD-PRINT
1
NOTE:
[ Login
]
Appendix-9 for details on entering characters.
2
[ Exit
]
IMPORTANT:
logged in using a Login User Name with administrator
privileges.
The default settings of the Login User Name and Login
Password are both "2600".
If you have logged in using a Login User Name without
administrator privileges, the screen will display
Administrator only. and return to the standby screen.
3
a b
[ Exit
]
4
[ Exit
]
5
2-18
Press the System Menu/Counter key on the main
unit operation panel.
When you are performing user management and
have not logged in, a login screen will appear.
Then, enter the Login User Name and Login
Password to log in.
Refer to Character Entry Method on
In the Sys. Menu/Count. menu, press the or
key to select [System/Network], and then press the
OK key.
To make the settings, you must have
In the System menu, press the or key to
select [Network Setting].
Press the OK key. The Network Setting menu
appears.
Press the or key to select [TCP/IP Settings].
Preparation before Use