Kyocera ECOSYS M6026cdn Type B Operation Manual page 492

Error Message
Error Code:1102
Error Code:1103
Error Code:1105
Error Code:2101,
2201, 2203
Checkpoints
Is a domain name entered?
Did you specify an invalid
user or password?
Did you specify an invalid
folder name or share name?
Did you specify a user who
is not allowed to access the
folder, or has access
permission been set for the
folder?
Are prohibited characters
included in the host name?
Is a domain name entered?
Is the correct folder path
entered?
Did you specify a user who
is not allowed to access the
folder, or has access
permission been set for the
folder?
Is SMB protocol enabled?
Did you enter an invalid host
name or IP address?
Is the wrong port number
specified?
Are you correctly connected
to the network?
Corrective Actions
Correctly enter the user name in the
"domain\user", "domain\user" or
"domain@user" format.
Enter the correct user name and
password.
Enter the correct folder name and
share name.
Check the access restrictions of the
destination folder.
Check if any of the following
characters are included in the host
name.
` ~ ! @ # $ ^ & * ( ) = + [ ] { } \ | ; : ' " <
> / ?
Correctly enter the user name in the
"domain\user", "domain\user" or
"domain@user" format.
Enter the correct folder path.
Check the access restrictions of the
destination folder.
Enable SMB protocol for the host
name in Command Center RX.
Enter the correct host name or IP
address.
Specify the correct port number.
Make sure that the network cable has
been correctly connected.
Make sure that the network
environment (server, hub, or other
LAN network) is operating correctly.
10-12
Troubleshooting
Reference
Page
—
—
—
—
—
—
—
—
—
—
—
—