Kyocera ECOSYS M6026cdn Type B Operation Manual page 512

Deleting a user
Local User List: a b
l DeviceAdmin
l Admin
*********************
l User1
Menu:
1
Detail/Edit
2
*********************
Delete
3
Add User
Enabling/Disabling Group Authentication
This enables group authentication using the LDAP server. This menu can be used only when [Netwk Authentic.]
is selected as the user authentication method. For details of LDAP server settings, refer to the Operation Guide
of the LDAP server. This menu can be used only when [Netwk Authentic.] is selected as the user authentication
method.
Use the procedure below to enable group authentication.
NOTE:
Refer to Character Entry Method on Appendix-9 for details on entering characters.
You can configure detail settings of group authentication in Command Center RX. For details, refer to the
Command Center RX User Guide.
User Login Set.: a b
1
*********************
User Login
2
Local User List
3
Group Auth.
5
1
[ Menu ]
2
a b
3
1
2
3
[ Exit ]
4
11-10
The overwrite confirmation screen appears.
Press [Yes] (the Left Select key). The user
information is changed and the screen returns to
Local User List.
Press the  or  key to select the user you want
to delete, and then press [Menu] (the Right Select
key).
Press the  or  key to select [Delete] and then
press the OK key.
In the delete confirmation screen, press [Yes] (the
Left Select key). The user is deleted and the
screen returns to Local User List.
See the procedure for displaying user control on
page 11-2, and display the User/Job Account.
Press the  or  key to select [User Login Set.].
Press the OK key. The User Login Set. menu
appears.
Press the  or  key to select [Group Auth.].
Management