Optional Function - Kyocera ECOSYS M6026cdn Type B Operation Manual

Optional Function

You can use the optional applications installed on this machine.
Overview of the Applications
The applications listed below are installed on this machine.
You can use these applications for a limited period on a trial basis.
• UG-33 (ThinPrint) (This application can only be activated in Europe.)
This application allows print data to be printed directly without a print driver.
NOTE:
Restrictions such as the number of times the application can be used during the trial period differ
depending on the application.
Sys. Menu/Count.:a b
1
2
3
*********************
Login User Name: L b
*******************
Login Password:
System:
1
*********************
2
3
Op Function:
1 *********************
2
[ Menu
Report
Counter
System
[ Exit
[ Login
Network Setting
I/F Block Set.
Security Level
[ Exit
ID-Card
UG-33
]
1
In the Sys. Menu/Count. menu, press the  or 
key to select [System], and press the OK key.
]
When you are performing user management and
have not logged in, a login screen will appear.
Then, enter the Login User Name and Login
Password to log in, and press [Login] (the Right
Select key).
]
2
The System menu appears.
a b
]
3
Press the  or  key to select [Op Function].
4
Press the OK key. The Op Function menu
a b
appears.
g
T
5
Press the  or  key to select desired application.
Appendix-6