Kyocera ECOSYS M6026cdn Type B Operation Manual page 126

Two-sided to Two-sided
Original
NOTE:
The paper sizes supported in Two-sided to Two-sided are Legal, Letter, Statement, 16K, ISO B5,
Oficio II, Executive, A4, B5, A5, Folio and Envelope C5.
The procedure for using two-sided/duplex copying is explained below.
Function Menu:
1 Paper Selection g
*********************
2
Collate
3
Duplex
Duplex:
1 *1-sided>>1-sided
*********************
2
1-sided>>2-sided
3
2-sided>>1-sided
Finish. Binding: a b
1 *o Left/Right
*********************
2 p Top
•
•
Produces two-sided copies from two-sided originals.
The document processor is required.
Copy
1
a b
T
T
[ Exit ]
2
3
a b
4
3-16
Binding Left/Right: Images on the second sides
are not rotated.
Binding Top: Images on the second sides are
rotated 180°.
Press the Function Menu key. Function Menu
appears.
Press the  or  key to select [Duplex].
Press the OK key. Duplex appears.
Press the  or  key to select the desired duplex
copying mode.
If you select [1-sided>>2-sided], press [Detail] (the
Right Select key) and you can select the binding
edge of the finished copies and the original setting
orientation.
Basic Operation