Wsd Scan Setup - Kyocera ECOSYS M6026cdn Type B Operation Manual

TCP/IP:
1 *Off
*********************
2
On
Bonjour:
1
Off
2 *On *********************

WSD Scan Setup

Select whether or not to use WSD Scan. The default setting is On.
Use the procedure below to setup the WSD-SCAN setting. The machine must be restarted after the setting is
changed.
Sys. Menu/Count.:a b
1
Report
2
Counter
3
*********************
System/Network
Login User Name: L b
*******************
Login Password:
8
a b
9
10
11
a b
12
1
[ Exit ]
[ Login ]
8-178
Default Setting (System Menu)
Press the OK key. TCP/IP appears.
Press the  or  key to select [On] and then press
the OK key.
Completed. is displayed and the screen returns to
the TCP/IP Settings menu.
Press the  or  key to select [Bonjour].
Press the OK key. Bonjour appears.
Press the  or  key to select [On] or [Off] and
then press the OK key.
Completed. is displayed and the screen returns to
the TCP/IP Settings menu.
In the Sys. Menu/Count. menu, press the  or 
key to select [System/Network], and press the OK
key.
When you are performing user management and
have not logged in, a login screen will appear.
Then, enter the Login User Name and Login
Password to log in, and press [Login] (the Right
Select key).