Function Defaults - Kyocera ECOSYS M6026cdn Type B Operation Manual

Function Defaults

Defaults are the values automatically set after the warm-up is completed or the Reset key is pressed.
Set the defaults for available settings such as copying and sending. Setting the frequently-used values as
defaults makes subsequent jobs easier.
Orig.Orientation
Set the original orientation defaults. The available default settings are shown below.
c Top Edge Top
d Top Edge Left
Refer to page 4-8 for Original Orientation.
Use the procedure below to select the default orientation when originals are placed on the platen.
Sys. Menu/Count.: a b
4
User/Job Account
5
User Property
6
*********************
Common Settings
Common Settings: a b
1
*********************
Language
2
Default Screen
3
Sound
Function Default: a b
1
*********************
Color Selection
2
Scan Resolution
3
FAX Resolution
Item
Select the original's top edge at the top.
Select the original's top edge at the left.
[ Exit ]
[ Exit ]
[ Exit ]
Description
1
In the Sys. Menu/Count. menu, press the  or 
key to select [Common Settings].
2
Press the OK key. The Common Settings menu
appears.
3
Press the  or  key to select [Function Default].
4
Press the OK key. The Function Default menu
appears.
5
Press the  or  key to select [Orig.Orientation].
8-30
Default Setting (System Menu)