Displaying Network User Property - Kyocera ECOSYS M6026cdn Type B Operation Manual

Group Auth.:
1 *Off
*********************
2
On

Displaying Network User Property

Use the procedure below to display the property of the user logged on using the network authentication. This
menu can be used only when [Netwk Authentic.] is selected as the user authentication method.
NOTE:
Refer to Character Entry Method on Appendix-9 for details on entering characters.
User Login Set.: a b
1
*********************
User Login
2
Local User List
3
Group Auth.
NW User Property: a b
1 *Off
*********************
2
On
5
a b
6
7
1
2
3
[ Exit ]
4
5
6
7
11-11
Press the OK key. Group Auth. appears.
Press the  or  key to select [On] or [Off].
Press the OK key.
Completed. is displayed and the screen returns to
the User/Job Account menu.
See the procedure for displaying user control on
page 11-2, and display the User/Job Account.
Press the  or  key to select [User Login Set.].
Press the OK key. The User Login Set. menu
appears.
Press the  or  key to select [NW User
Property].
Press the OK key. NW User Property appears.
Press the  or  key to select [On] or [Off].
Press the OK key.
Completed. is displayed and the screen returns to
the User/Job Account menu.
Management
11