Kyocera ECOSYS M6026cdn Type B Operation Manual page 210

Select Computer: a b
P Computer01
*********************
P Computer02
P Computer03
[ Cancel ] [ Detail ]
Press Start Key.
P :Computer01
6
Select the destination computer from the computer
list.
Press [Detail] (the Right Select key) to see the
information of the selected computer.
7
Press the OK key to confirm the destination, and
then press the Start key. Transmission starts.
NOTE:
To change the destination computer, press the
Back key and then press [Yes] (the Left Select key).
This brings you back to step 6.
NOTE:
To use WSD Scan from your computer, press
[From Computer] in step 5 and then scan the original
from the computer.
5-26
Sending Functions