Printer:
1
*********************
Emulation Set.
2
Color Setting
3
EcoPrint
FormFeed TimeOut: D b
LF Action
Set the line feed action when the machine receives the line feed code (character code 0AH). The table below
shows the available settings. The default setting is LF Only.
LF Only
LF and CR
Ignore LF
Use the procedure below to specify a LF action.
Sys. Menu/Count.:a b
7
Copy
8
*********************
Printer
9
Send
a b
[ Exit
(5 - 495)
******30*Sec.
Item
Only line feed performed.
Line feed and character return performed.
No line feed performed.
[ Exit
2
Press the OK key. The Printer menu appears.
]
3
Press the or key to select [FormFeed
Timeout].
4
Press the OK key. FormFeed Timeout appears.
5
Press the or key to set the Form Feed
Timeout. You can set the timeout delay in seconds.
You cannot use the numeric keys to enter this
value.
6
Press the OK key. Completed. is displayed and the
screen returns to the Printer menu.
Description
1
In the Sys. Menu/Count. menu, press the or
key to select [Printer].
]
8-110
Default Setting (System Menu)