Kyocera ECOSYS M6026cdn Type B Operation Manual page 406

Low Power Timer: M b
Sleep Level (models except for Europe)
Detailed settings can be selected for sleep mode. Detailed settings for sleep mode are called Energy Saver
mode. When a function is set in Energy Saver mode and the function sends data to the machine, the machine
does not execute the function. When Quick Recovery is specified, the machine wakes from sleep mode when
any kind of data is received.
Example: When print data is sent from a PC connected by Network
Quick Recovery
Energy Saver
Use the procedure below to specify the Sleep Level.
Sys. Menu/Count.:a b
4
User/Job Account
5
User Property
6
*********************
Common Settings
Common Settings: a b
1
*********************
Language
2
Default Screen
3
Sound
(1 - 240)
*******1*min.
When the machine receives print data, it wakes from sleep mode and starts
printing.
The machine does not wake from sleep mode when it receives print data and
printing does not take place.
[ Exit
[ Exit
6
Press the OK key. Low Power Timer appears.
7
Press the  or  key to set the Low Power Timer.
Set the amount of time before entering the Low
Power state in minutes. You cannot use the
numeric keys to enter this value.
8
Press the OK key. Completed. is displayed and the
screen returns to the Timer Settings menu.
1
In the Sys. Menu/Count. menu, press the  or 
key to select [Common Settings].
]
2
Press the OK key. The Common Settings menu
appears.
]
3
Press the  or  key to select [Timer Setting], and
press the OK key.
8-150
Default Setting (System Menu)