Diagnosis; System Leakage Test - Daewoo MUSSO Service Manual

Hide thumbs Also See for MUSSO:

Table of Contents

1D2-4 M161 ENGINE COOLING

Tools Required

124 589 15 21 00 Tester

Test Procedure

1. Loosen the cap a little and release pressure and remove

For the risk of scalding, cap must not be opened unless the

coolant temperature is below 90°C.

2. Fill coolant up to upper edge (arrow) of reservoir.

3. Connect the special tool to the reservoir filler cap and apply

1.4 bar of pressure.

4. If the pressure on the tester drops, check leakage at the all

coolant hoses and pipes and each connections. Replace

or retighten if necessary.

DIAGNOSIS

Tester 124 589 15 21 00

Table of Contents