Daewoo MUSSO Service Manual page 444

1B3-140 OM600 ENGINE MECHANICAL
Tools Required
602 589 00 40 00 Engine Lock
Removal Procedure
1. Rotate the crankshaft and position the piston of no.1 cylinder
at TDC.
Notice
Do not rotate the crankshaft in the opposite direction of
engine rotation.
In this position, the markings of the camshaft/camshaft
bearing cap (arrow) must be aligned.
2. Place alignment marks on the camshaft sprocket and timing
chain.
3. Remove the starter motor and install the engine lock.
Engine Lock 602 589 00 40 00