Daewoo MUSSO Service Manual page 335

Hide thumbs Also See for MUSSO:

Table of Contents

Assembly Procedure

In case the prechambers are reused, inspect the

prechambers thoroughly, if the ball pin by heat and fire is

broken, it can not be used.

1. Clean the sealing surface of the prechamber.

2. Insert the prechamber into the cylinder head at the same

time aligning the cam on the collar of the prechambers with

the slots in the cylinder head.

If the spacer rings are fitted to the prechambers, the spacer

rings should be replaced with rings of the same thickness.

Thickness of Spacer Ring

3. Coat the threaded ring with oil and assemble the ring by

using the serration wrench.

Tightening Torque

0.3, 0.6, 1.0 mm

OM600 ENGINE MECHANICAL 1B3-31

Chapters

Table of Contents