Coolant Connection Fitting - Daewoo MUSSO Service Manual

COOLANT CONNECTION FITTING

Preceding Work : Removal of cooling fan shroud
1 Bolt (M8 X 100, 2 pieces) ............... 22.5-27.5 Nm
2 Engine Hanger Bracket
3 Coolant Outlet Port
Removal & Installation Procedure
1. Drain coolant from the radiator.
2. Remove the hose mounting clamp (5) and disconnect the
coolant hose (6).
3. Remove the two bolts (1), the engine hanger bracket (2)
and coolant outlet port (3).
Installation Notice
Tightening Torque
Replace the O-ring with new one.
4. Installation should follow the removal procedure in the
reverse order.
5. Fill up the coolant as specified.
6. Check the leaks in the cooling system.
4 O-ring
5 Hose Mounting Clamp
6 Hose
22.5 - 27.5 Nm
M162 ENGINE COOLING 1D1-7