OIL DIPSTICK GUIDE TUBE
1 Oil Dipstick Level Gauge
2 Oil Dipstick Guide Tube
3 O-ring
Removal & Installation Procedure
1. Pull out the oil dipstick level gauge (1).
2. Unscrew the bolt (4) and remove the oil dipstick guide
tube (2).
Installation Notice
Tightening Torque
It is very hard to remove the oil dipstick guide tube without
special tool. If it is not necessary, do not remove the guide
tube.
3. Installation should follow the removal procedure in the
reverse order.
4. Check for leaks by starting the engine.
M161 ENGINE MECHANICAL 1B2-105
4 Bolt (M6 X 16, 1 piece) ........................... 9-11 Nm
5 Clamp
9 - 11 Nm