Daewoo MUSSO Service Manual page 943

Removal & Installation Procedure
1. MANDO Brake
Remove the hose mounting nut and disconnect the hose.
Installation Notice
Tightening Torque
2. PBR Brake
Remove the eye-hose bolt and disconnect the hose.
Installation Notice
Tightening Torque
3. Remove the wheel speed sensor (for ABS vehicies).
Installation Notice
Tightening Torque
4. Remove the mounting bolts and then caliper assembly.
Installation Notice
Tightening Torque
25 - 35 Nm
15 - 18 Nm
6 - 8 Nm
85 - 105 Nm
FRONT DISC BRAKES 4D-3