Daewoo MUSSO Service Manual page 144

8. Install the lever pusher (11) and the thrust piece (8) to the
slide (9).
9. Mount the thrust piece (8) vertically to the valve spring
retainer (3).
10. Make the thrust piece (8) and the slide (9) perpendicular
to each other.
11. Secure the slide (9) by turning the adjust bolt (10).
12. Press the valve spring (4) by using the lever pusher (11).
13. Remove the valve cotter (2) using either the pincette (13)
or magnetic finger.
14. Remove the upper retainer (3) and the valve spring (4).
15. Remove the valve stem seal and replace if necessary.
Notice
Check the valve stem seal and replace if necessary.
16. Remove the lower retainer (6).
Notice
Check the retainer for damages and replace with a new
one if necessary.
17. Installation should follow the removal procedure in the
reverse order.
Lever Pusher 111 589 18 61 00
Magnetic Finger 116 589 06 63 00
M162 ENGINE MECHANICAL 1B1-69