Daewoo MUSSO Service Manual page 870

To correct unbalance, install equal weights 180° opposite
each other, one on the inside of the wheel and one on
the outside, at the point of unbalance.
Balance Weight
10g 20g
0.4oz 0.7oz
6. Cautions for installation and removal.
Clean the mounting surfaces of hub and wheel.
Do not apply grease or oil on the nuts and bolts (It will
cause looseness and poor tightening).
Using a jack, lift up the tire about 3cm from the ground.
Tighten nuts in a criss-cross pattern 2-3 times.
Tighten Torque
30g 40g 50g
1.10oz 1.40oz 1.80oz
Steel : 80 - 120Nm
Aluminium : 110 - 130Nm
60g
2.1oz
TIRES AND WHEELS 2E-7