1G1-4 M162 ENGINE INTAKE & EXHAUST
INTAKE AIR DUCT
Removal & Installation Procedure
1. Remove the clamp (1) and disconnect the HFM sensor.
2. Remove the nut (3) (arrow).
3. Remove the clamp (4).
4. Remove the intake air duct (5) carefully.
Installation Notice
Exactly seat the pin of intake air duct onto the crankcase
ventilation rubber mount.
5. Installation should follow the removal procedure in the
reverse order.
1 Clamp
2 Sleeve
3 Nut
4 Clamp
5 Intake Air Duct