Daewoo MUSSO Service Manual page 109

1B1-34 M162 ENGINE MECHANICAL
2. Remove the cylinder head front cover (6).
Installation Notice
Tightening Torque
Apply the sealant at the mating surface of the cylinder head
and the front cover.
3. Remove the upper guide rail pin and the guide rail (3).
Installation Notice
Install it while the chain tensioner is loose.
4. Remove the gasket (arrow).
Installation Notice
Replace the gasket with new one and apply the sealant.
5. Installation should follow the removal procedure in the
reverse order.
22.5 - 27.5 Nm