Daewoo MUSSO Service Manual page 774

Tools Required
617 589 08 21 00 Position Sensor
Adjustment Procedure
1. Position the No. 1 cylinder at ATDC 15°
Notice
Do not rotate the engine in opposite direction of engine
rotation.
2. Remove the bolt (2) at the supporting bracket.
3. Remove the bolt (4).
4. Turn the adjusting screw (1) until both lamps 'A' + 'B' on
the position sensor light up.
To the right
To the left
Notice
If the adjustment range is not adequate, remove the injection
pump and reinstall.
5. After adjusting, retighten all the bolt to the specified torque.
Start of delivery retarded
Start of delivery advanced
Position Sensor 617 589 08 21 00
OM600 ENGINE CONTROLS 1F3-43