Daewoo MUSSO Service Manual page 504

Tools Required
603 589 00 40 00 Counter Holder
Removal & Installation Procedure
1. Hold the cooling fan pulley using the counter holder (special
tool : 603 589 00 40 00) and remove the cooling fan after
unscrewing the four bolts (4).
Installation Notice
Tightening Torque
2. Remove the bolt (5) from the viscous clutch and remove
the viscous clutch from the cooling fan pulley.
Installation Notice
Tightening Torque
3. Installation should follow the removal procedure in the
reverse order.
9 - 11 Nm
40.5 - 49.5 Nm
M162 ENGINE COOLING 1D1-13