Daewoo MUSSO Service Manual page 808

1G3-4 OM600 ENGINE INTAKE & EXHAUST
Removal & Installation Procedure
1. Loosen the air duct hose clamp and then remove the air
cleaner and air duct hose.
2. Disconnect the air cleaner housing cover clamp and remove
the cover and element.
Operating Interval
3. Loosen the nut (4EA) and remove the air cleaner housing
from the intake manifold.
Tightening Torque
Notice
Do not fold the rubber.
4. Loosen the clamp and remove the air duct hose.
5. Loosen the mounting nut and bolt.
6. Remove the air inlet duct and hose.
7. Installation should follow the removal procedure in the
reverse order.
Clean every 20,000km
Replace every 60,000km
9 - 11 Nm