1B1-58 M162 ENGINE MECHANICAL
CAMSHAFT SPROCKET BOLT
Intake Flange Shaft Bolt
Tightening Torque
Notice
The sprocket bolts are designed to be used only once, so
always replace with new one.
Exhaust Camshaft Sprocket Bolt
Tightening Torque
Notice
The sprocket bolts are designed to be used only once, so
always replace with new one.
1st step 18 - 22 Nm
2nd step 90° ± 5°
C. M7 x 13 Collar Bolt Torx-T30
e. 6.8 mm
16. Flange Shaft
18. Control Piston
22. Intake Camshaft
1st step 18 - 22 Nm
2nd step 90° ± 5°
E. M7 x 13 Collar Bolt Torx-T30
e. 6.8 mm
13a. Camshaft Sprocket
22a. Exhaust Camshaft