Daewoo MUSSO Service Manual page 228

CYLINDER HEAD FRONT COVER
Preceding Work : Removal of cylinder head cover
Removal of thermostat housing assembly
Removal of engine hanger bracket
1 Bolt (M6 X 16, 3 pieces) ......................... 9-11 Nm
2 Camshaft Adjuster
3 Bolt (M8 X 35, 2 pieces) ................. 22.5-27.5 Nm
4 Bolt (M6 X 22, 6 pieces) ......................... 9-11 Nm
5 Front Cover (E23 : M161.973)
Removal & Installation Procedure
1. Disconnect the camshaft adjuster connector and remove
the camshaft adjuster (E23 engine only).
Installation Notice
Tightening Torque
6 Front Cover (E20 : M161.943)
7 Sleeve
8 O-ring .................................................... Replace
9 Thermostat Housing
9 - 11 Nm
M161 ENGINE MECHANICAL 1B2-37