System Requirements For Remote Resource/Pxe Servers - Fujitsu Siemens Computers PRIMERGY RX100 S4 User Manual

Remote Installation Using a Remote Resource Server
In remote installation using a remote resource server, ServerStart starts up on the target server.
Procedures for starting installation are the same as those in normal installation (preparation, guided, and
expert modes). Once installation started, resources necessary for installation are provided from the
remote resource server. Thus, procedures such as inserting a CR-ROM are not necessary.
Active ServerStart
and start installation
Target server
3.4.2 System Requirements for Remote Resource/PXE
Servers
Because remote installation is performed via a network, the environment must have at least one
Windows server and a local area network.
In addition, the following environment is required.
Remote Resource/PXE Server Requirements
Remote resource server
OS Windows Server 2003
Windows 2000 Server
Memory 256MB or more
Operating • File sharing function (required)
environment
Notes on the PXE server
Check that no other PXE server exists on the same LAN.
Servers installed with software with the PXE function such as the Microsoft RIS function cannot be
used as a PXE server.
1) Request resources
2) Supply resources
table: System Requirements for Remote Resource/PXE Servers
PRIMERGY RX100 S4 User's Guide
Remote resource server
PXE server
Windows 2000 Server SP2 to 4
Windows Server 2003
256MB or more
• DHCP server function (required on the same network)
• File sharing function (required)
- OS
- Service Pack
- Application
etc.
87
3