Cpu Status Submenu; Memory Status Submenu - Fujitsu Siemens Computers PRIMERGY RX100 S4 User Manual

Chapter 8 Configuring Hardware and Utilities
Item
Timeout Value
ASR&R Boot Delay
Power Cycle Delay
Boot Retry Counter
Diagnostic System
Next Boot uses
Device Instance
Temperature Monitoring
CPU Status
Memory Status
Console Redirection

■ CPU Status Submenu

This submenu sets to allow the use of the installed CPU or not.
Item
CPU 0 Status

■ Memory Status Submenu

This submenu sets to allow the use of the installed memory.
Item
DIMM-1A
DIMM-2A
DIMM-1B
DIMM-2B
224
table: Items on the Server Menu
Setting
• 0 (At the time of
purchase)
• 0 – 100
• 2 (At the time of
purchase)
• 1 – 30
• 7 (At the time of
purchase)
• 0 – 15
• 3 (At the time of
purchase)
• 0 – 7
Disabled (Unchangeable)
Boot option (Unchangeable)
1 (Unchangeable)
Disabled (Unchangeable)
Press the [Enter] key to display the
Press the [Enter] key to display the "
Press the [Enter] key to display the "
window.
table: Items on the CPU Status Submenu
Setting
Enabled (Unchangeable)
table: Items on the Memory Status Submenu
Setting
Enabled (Unchangeable)
Description
Sets the timeout period in minutes.
Sets the standby time for startup after shutdown due
to trouble (such as overheating) in minutes. The
system restarts after the set standby time. While in
standby, the power LED is on green.
Sets the time until the server is turned on after it is
turned off.
Sets the maximum number of retries to boot the
operating system within the range of 0 to 7.
Sets to diagnose the BootDevice or not when
restarting with ASR&R.
Sets the boot device during the restart.
This item can be set when [Diagnostic System] is not
set to [Disabled] or [Disk Not Installed].
This item can be set only when [Diagnostic System]
is set to [LAN].
Sets if the server can be turned on when the
temperature is not in its operating environment range
(10 – 35 °C).
■
" CPU Status Submenu" (pg.224) window.
■
Memory Status Submenu" ( pg.224) window.
■
Console Redirection Submenu" ( pg.225)
Description
Sets to allow the use of CPUs installed in CPU Socket
0.
Description
Sets to allow the use of memory in Memory Slots 1A
to 2B.