Fujitsu Siemens Computers PRIMERGY RX100 S4 User Manual page 122

Chapter 4 Manual OS Installation
2. When the "Please insert the disk labeled Manufacturer-supplied hardware support
disk into Drive A:" message appears, press the [Enter] key.
The following message appears.
You have chosen to configure a SCSI Adapter for use with
Windows 2000, using a device support disk provided by an
adapter manufacturer.
Select the SCSI Adapter you want from the following list,
or press ESC to return to the previous screen.
3. Select the following, and press the [Enter] key.
LSI Logic Fusion-MPT Driver for SAS1068 (Windows 2000)
4. When the following message appears, press the [S] key.
The driver you provided seems to be newer than the Windows
default driver.
5. Follow the instructions in the window to perform installation
The message which prompts you to insert the floppy disk appears during the installation,
insert the driver disk and press the [Enter] key.
6
Follow the instructions from the setup program to continue the installation
procedures.
Cautions on Restarting
7
Install the ChipSet driver.
1. Insert the ServerStart Disc 1 CD-ROM into the drive of the server.
If the ServerStart window appears, exit ServerStart.
2. Execute the following command on the ServerStart CD-ROM.
[CD-ROM drive] :\DRIVERS\ChipSet\Intel\Intel3000\Setup.exe
The installation wizard starts up.
3. Click [Next]. Follow the instructions in the window to perform installation.
4. When the "InstallShieled(R) wizard has completed" message appears, eject the
ServerStart CD-ROM from the CD-ROM drive and click [Finish] to restart the
system.
8
Install the LAN driver.
Install the LAN driver using the driver disk created from the ServerStart CD-ROM. For more
details, refer to "4.3 Installing the LAN Driver" ( pg.125).
9
Install the LAN driver advanced setup tool.
For information about onboard LAN driver advanced setup tool, refer to "5.6.1 BACS
Installation" ( pg.160). For information about LAN card advanced setup tool, refer to "5.7.1
Intel® PROSet Installation" ( pg.165).
122
In the course of installation, a message appears to indicate that the setup program restarts.
Wait until it restarts automatically.