Fujitsu Siemens Computers PRIMERGY RX100 S4 User Manual page 117

7
Install the ChipSet driver.
1. Insert the ServerStart Disc 1 CD-ROM into the drive of the server.
If the ServerStart window appears, exit ServerStart.
2. Execute the following command on the ServerStart CD-ROM.
[CD-ROM drive] :\DRIVERS\ChipSet\Intel\Intel3000\Setup.exe
The installation wizard starts up.
3. Click [Next]. Follow the instructions in the window to perform installation.
4. When the "InstallShieled(R) wizard has completed" message appears, eject the
ServerStart CD-ROM from the CD-ROM drive and click [Finish] to restart the
system.
8
Install the LAN driver.
Install the LAN driver using the driver disk created from the ServerStart CD-ROM. For more
details, refer to "4.3 Installing the LAN Driver" ( pg.125).
9
Install the LAN driver advanced setup tool.
For information about onboard LAN driver advanced setup tool, refer to "5.6.1 BACS
Installation" ( pg.160). For information about LAN card advanced setup tool, refer to "5.7.1
Intel® PROSet Installation" ( pg.165).
10
Install the display driver.
1. Insert the ServerStart Disc 1 CD-ROM into the drive of the server.
If the ServerStart window appears, exit ServerStart.
2. Execute the following command on the CD-ROM.
[CD-ROM drive] :\DRIVERS\VIDEO\MATROX\w2k3x64\setup.bat
The installation wizard starts up.
3. Click [Next]. Follow the instructions in the window to perform installation.
4. When the installation is completed, eject the ServerStart CD-ROM from the CD-
ROM drive and click [Finish] to restart the system.
11
Install high reliability tools.
To ensure stable server operation, refer to "Chapter 6 High Reliability Tools" ( pg.169) and
install high reliability tools. For array type, RAID Management Tool (ServerView RAID) is
installed at the same time. When installing RAID Management Tool manually, refer to "6.1.1
Installing RAID Management Tool" ( pg.170).
The installation of Windows Server 2003 x64 has completed.
Before Starting Operation
After OS installation, refer to "Chapter 5 Operations after OS Installation" ( pg.133) and perform the
necessary procedures.
PRIMERGY RX100 S4 User's Guide
4
117