For Windows 2000 Server - Fujitsu Siemens Computers PRIMERGY RX100 S4 User Manual

9.6.2 For Windows 2000 Server

●
Items Required
• Windows 2000 Server CD-ROM
• Windows 2000 Server system recovery disk (created beforehand)
1
Insert the Windows 2000 Server CD-ROM after turning on the server.
Check that there are no floppy disks in the floppy disk drive.
2
From the [Welcome to Setup] window of the Windows 2000 Server Setup
program, press the [R] key to select restoration.
3
Follow the message on the setup window to restore the system.
Notes on system restoration
The system may return to the initial installation conditions depending on the restoration information
used. In this case, the system must be configured after system restoration.
Windows 2000 Server may have to be reinstalled if system files or system information are severely
damaged. If this is the case, reinstall it. Refer to "9.7 Reinstalling the OS" ( pg.258)
The message "The file ******.*** is not the original file copied when Windows 2000 was installed."
appears during file restoration. Press the [Enter] or [A] key to restore the file.
PRIMERGY RX100 S4 User's Guide
9
257