Fujitsu Siemens Computers PRIMERGY RX100 S4 User Manual page 142

Chapter 5 Operations after OS Installation
Paging File Setting
Set up the paging file according to the following procedures:
1
Log on to the server with administrator privileges.
2
Check free space of the drive where the system is installed.
Check the required amount of free space according to "
( pg.139). If the drive has no free space, refer to "
( pg.241).
3
Click [Start] → [Settings] → [Control Panel].
4
Double-click the [System] icon.
The [System Properties] window appears.
5
Click the [Advanced] tab and click [Performance Options].
The [Performance Options] window appears.
142
Checking Hard Disk Free Space"
Cannot Collect the Memory Dump"