Power On/Off Submenu - Fujitsu Siemens Computers PRIMERGY RX100 S4 User Manual

Chapter 8 Configuring Hardware and Utilities

8.2.9 Power On/Off Submenu

This submenu appears when selecting "Power On/Off" in the [Advanced] menu.
Use this submenu to configure power On/Off settings.
Main Advanced
Power On Source
Remote:
LAN:
Wake Up Timer:
Wake Up Time:
Wake Up Mode:
Power Off Source
Software:
Power Button:
Power Failure Recovery:
F1 Help
Esc Exit
Item
Power On Source
Remote
LAN
Wake Up Timer
Wake Up Time
Wake Up Mode
218
Security Server
Power On/Off
[BIOS Controlled]
[Disabled]
[Enabled]
[Disabled]
[00:00:00]
[Daily]
[Enabled]
[Enabled]
[Previous State]
-/+ Change Values
Select Item
Select Menu
Enter Select
table: Items on the Power On/Off Submenu
Setting
BIOS Controlled
(Unchangeable)
• Disabled (At the time of
purchase)
• Enabled
• Disabled
• Enabled (At the time of
purchase)
Disabled (Unchangeable)
Sets the startup time when using [Wake Up Timer].
Daily (Unchangeable)
Exit
Item Specific Help
Setup Defaults
F9
F10 Save and Exit
Sub-Menu
Description
Configures the power on setting.
Sets if the power is turned on when the modem
(connected to the serial port) receives a ring
signal.
Sets to enable the power to be turned on via LAN
or not.
Sets if the power is turned on at a certain time or
after a certain time has passed. A separate
program is necessary for setting startup time.
Sets the following items if [Wake Up Timer] is
set to "Enabled".
Sets the startup mode when using [Wake Up
Timer].