Bios Setup Utility; Starting And Exiting The Bios Setup Utility - Fujitsu Siemens Computers PRIMERGY RX100 S4 User Manual

8.2 BIOS Setup Utility

This section explains settings for the BIOS Setup Utility and items regarding each
setting.

8.2.1 Starting and Exiting the BIOS Setup Utility

The following explains how to start and exit the BIOS Setup Utility.
■ How to Start the BIOS Setup Utility
1
Turn the server on.
2
During POST, press the [F2] key while the message "<F2>BIOS Setup / <F12>
BOOT Menu" is displayed on the screen.
The [Main] menu is displayed when POST completes.
Main
System Time:
System Date:
Standard IDE:
Boot Options
Base Memory:
Extended Memory:
Help
F1
Esc Exit
When the [Main] menu is not displayed
When the [Main] menu is not displayed because the [F2] key is pressed at wrong timing, press
the [Ctrl] + [Alt] + [Delete] keys at the same time to reset, restart the system, and then start the
BIOS Setup Utility.
Advanced Security Server
[HH:MM:SS]
[MM:DD:YYYY]
[******]
640KB
***M
-/+ Change Values
Select Item
Select Menu Enter Select
PRIMERGY RX100 S4 User's Guide
Exit
Item Specific Help
F9 Setup Defaults
Save and Exit
Sub-Menu F10
8
205