Installing Linux - Fujitsu Siemens Computers PRIMERGY RX100 S4 User Manual

Chapter 4 Manual OS Installation
7. Select [Install an optimum driver (Recommended)] and click [Next].
The [Identify Driver File] window appears.
8. Check [CD-ROM drive] in [Search location options] and click [Next].
Detected drivers are displayed.
9. Click [Next].
Driver installation starts. When it is completed, a completion window appears.
10. Click [Finish].
11. Click [Close] to close the properties window.
13
Install high reliability tools.
To ensure stable server operation, refer to "Chapter 6 High Reliability Tools" ( pg.169) and
install high reliability tools. For array type, RAID Management Tool (ServerView RAID) is
installed at the same time. When installing RAID Management Tool manually, refer to "6.1.1
Installing RAID Management Tool" ( pg.170).
The installation of Windows 2000 Server has completed.
Before Starting Operation
After OS installation, refer to "Chapter 5 Operations after OS Installation" ( pg.133) and perform the
necessary procedures.

4.2.4 Installing Linux

For the use of Linux, refer to the Fujitsu PRIMERGY website (http://primergy.fujitsu.com).
124