Installable Expansion Cards And Notes - Fujitsu Siemens Computers PRIMERGY RX100 S4 User Manual

7.4.2 Installable Expansion Cards and Notes

This section explains expansion cards that can be installed and provides notes on installation.
■ Basic Card Slot
●
Installable Expansion Cards
Up to two expansion cards listed on the following table can be installed in the server.
Installable expansion card (Model name)
SCSI Ctrl U160 lp (PG-1301L)
Eth. Ctrl 1000-BASE-T Cu lp (PG-1892L)
Eth. Ctrl 1000-BASE-SX Fibre LC lp (PG-1882L)
Eth. Ctrl 2x1000-BASE-T Cu (PG-1862)
●
Location and Order of Expansion Card Installation
For expansion cards, use the PCI slots in accordance with the order indicated in the following table.
Follow the installation order shown in the table when installing the cards and drivers.
If the expansion cards are installed in wrong order, they will not function properly.
Installable expansion card (Model name)
SCSI Ctrl U160 lp (PG-1301L)
Eth. Ctrl 1000-BASE-T Cu lp (PG-1892L)
Eth. Ctrl 1000-BASE-SX Fibre LC lp (PG-1882L)
Eth. Ctrl 2x1000-BASE-T Cu (PG-1862)
-: Not installable.
table: List of Installable Expansion Cards
table: Installation Order and Slots for Expansion Cards
PRIMERGY RX100 S4 User's Guide
Number
Remarks
of cards
For an external SCSI option
1
(Ultra 160 SCSI, LowProfile)
2
1000BASE-T, LowProfile
2
2 2
1000BASE-SX, LowProfile
1
1000BASE-T, Dual Port
PCI slot
1 2
1
-
2 1
2 1
1 -
Installation order
1
2 7
3
4
187