Fujitsu Siemens Computers PRIMERGY RX100 S4 User Manual page 17

●
Supporting OS
Using ServerStart V6.609, the following OSs can be installed.
®
• Microsoft Windows Server
®
• Microsoft Windows Server
®
• Microsoft Windows Server
®
• Microsoft Windows Server
®
• Microsoft Windows Server
®
• Microsoft Windows Server
®
• Microsoft Windows Server
®
• Microsoft Windows Server
®
• Microsoft Windows
®
• Microsoft Windows
ServerStart does not support to install Linux.
The OS which is not supported by the server cannot be installed.
●
Configuration File (SerStartBatch.ini)
A configuration file stores the server setup information configured in ServerStart. To create a
configuration file, use the ServerStart floppy disk supplied with this server. Store only one file on each
floppy disk. Do not set the ServerStart floppy disk to the write-protected state.
You can use any name for the configuration file. However, the file must be installed in the server as
"SerStartBatch.ini". When installing the configuration file, make sure to save it as "SerStartBatch.ini" on
the ServerStart floppy disk.
Start up ServerStart, insert the ServerStart floppy disk containing "SerStartBatch.ini", and click [Start] to
install the server.
®
2003, Standard Edition
®
2003, Enterprise Edition
®
2003, Standard x64 Edition
®
2003, Enterprise x64 Edition
®
2003 R2, Standard Edition
®
2003 R2, Enterprise Edition
®
2003 R2, Standard x64 Edition
®
2003 R2, Enterprise x64 Edition
®
2000 Server, SP4 already applied.
®
2000 Advanced Server, SP4 already applied.
PRIMERGY RX100 S4 User's Guide
1
17