Security Menu - Fujitsu Siemens Computers PRIMERGY RX100 S4 User Manual

8.2.11 Security Menu

The [Security] menu sets the security options.
Main Advanced
Setup Password:
System Password:
Set Setup Password:
Setup Password Lock:
Set System Password:
System Password Mode:
System Password Lock:
System Load:
Setup Prompt:
Virus Warning:
Flash Write:
F1 Help
Exit
Esc
Item
Setup Password
System Password
Set Setup Password
Setup Password Lock
Set System Password
Security Server
Not installed
Not installed
[Press Enter]
[Standard]
[Press Enter]
[System]
[WOL Skip]
[Standard]
[Enabled]
[Disabled]
[Enabled]
-/+ Change Values
Select Item
Select Menu Enter Select
table: Items on the Security Menu
Setting
Displays the setting of a password (setup password) that is used for security of
BIOS setup.
• Not Installed: A password has not been set.
• Installed: A password has been set.
Displays the setting of a password (system password) that is used for security of
system start-up.
• Not Installed: A password has not been set.
• Installed: A password has been set.
Sets a setup password.
Setting a setup password makes it necessary to enter the password in order to start
the BIOS Setup Utility.
Press the [Enter] key to display the password input window. Enter the setup
password. For more details, refer to "9.4.2 Security against Unauthorized Use"
( pg.250).
• Standard (At the time of
purchase)
• Extended
Sets a system password.
Setting a system password makes it necessary to enter the password in order to
access this server.
[Setup Password] must be specified.
Press the [Enter] key to display the password input window. Enter the setup
password. For more details, refer to "9.4.2 Security against Unauthorized Use"
( pg.250).
PRIMERGY RX100 S4 User's Guide
Exit
Item Specific Help
F9 Setup Defaults
Sub-Menu F10 Save and Exit
Description
Keyboard can be locked while initializing
expansion card. When an expansion card that can
be setup during system start-up is installed, the
expansion card settings can be protected by locking
the keyboard.
This item can be set only when [Setup Password] is
specified.
8
221