Turning Off The Server - Fujitsu Siemens Computers PRIMERGY RX100 S4 User Manual

1.4.3 Turning Off the Server

1
Make sure that the CD-ROM drives are empty.
2
Shut down the OS.
In the following cases, the server is turned off after the OS is shut down (Step 3 is not necessary).
• Windows OS
• When ServerView is installed
In other cases, shut down the OS and make sure that hard disk access LEDs are off.
3
Press the power switch at the front of the server with a penpoint or thin object.
The server's power LED turns amber.
4
Turn off the display and peripheral devices.
The server turn off time can be set with the ASR setting (on the [Power On/Off] tab) using ServerView
supplied with this server. For details, refer to "3.4 Serious Error Handling (ASR)" in "ServerView User's
Guide" on the PRIMERGY Document & Tool CD.
• In the event of smoke or sparks, immediately unplug the power plug from the
outlet. Failure to do so may lead to a fire or electric shock.
• When turning off the server, make sure to follow the procedures described in
this section. Data may be lost if these procedures are not followed correctly.
The server's
Power switch
power LED
turns amber
• Make sure to wait for 10 seconds or longer after shutdown before turning the
server on.
PRIMERGY RX100 S4 User's Guide
1
33